Full Automatic Hot Coil Cold Coil 0.3mm-3.0mm Cutting Line
Cutting line is mainly used for metail coil shear from decoiling,feeding, flattening,cutting,conveyor belt,unloading.
Its function is to shear wide metal coil longitudinlly into narrow coils, many kinds of material are availble to shear, such as,
cold rolled plate, electrolytic galvanized plate, hot dip galvanized plate, color-coated plate, stainless steel plate, aluminum plate,
cooper plate etc.
| 1 |
Coil material: Galvanized sheet, PPGI, GI |
| 2 |
Thickness of material: 0.3-3.0mm |
| 3 |
Width of material:1600mm; |
| 4 |
Slitting speed:10-50m/min |
| 5 |
Rolls of Flattening: 15 rolls |
| 6 |
Diameter of shaft:115mm |
| 7 |
Material of shaft:40Cr,with hard treatment. |
| 8 |
Power of slitting:30kw |
10 tons Hydraulic decoiler with car:
Active un-coiler: active to uncoiling.
Capacity of un-coiler: 10 tons
Width of steel coil: 1250mm
Inner diameter of steel coil: 508-610mm
Outer diameter of steel coil: φ1300mm
Material of main shaft: 40Cr
Decoiler motor:5.5kw
Hydraulic motor power: 4kw
Uncoiling speed: 10-30m/min
Flattening:
Coil material: Galvanized sheet, PPGI, GI
Thickness of material: 0.3-3.0mm;
Width of material:1250mm;
Cutting speed:10-50m/min;
Cutting length tolerance: ±0.1mm
Cutting machine:
Blade material:Cr12mov with hard treatment.
Power:15KW
Control way: PLC, automatic working
Conveyor Belt:
It is delivery cutted coil into unloading system,and it is adjusting speed to match with cutting machine and unloading table.
It is controlled by PLC.
Unloading System:
It is collect finish cutted coil in automatic,so we can save workers to do this job.
Driven by air pump.
Controlled by PLC.
Our advantages :
){kind=link}
){kind=link}